I spoke with my contact at Rack'em and was able to verify that the Backpack Blower Adapter # RA-STIHL referenced in your question is indeed compatible with your Stihl BR-700 Backpack Blower.
This adapter kit will work great with the Pack'Em Rack for Open Utility Trailers # PK-6-OP1 to hold your blower. This is a really great system that will allow you to load up your trimmers and backpack blower to your open trailer. I have attached a couple of short video demonstrations on this product... view full answer...
You will not need an adapter for your Shindaiwa EB802RT backpack blower to use on the Rack'Em Lockable Blower Rack # RA-19. This is the same rack that comes in the Pack'Em Rack for Open Utility Trailers Kit # PK-BM-OP1. view full answer...
The Pack Em Rack, # PK-6-OP1, will hold an Echo backpack blower, but you will need to use the Rack Em Backpack Blower Adapter, # RA-STIHL.
To attach to the blower frame, the tubing must be slit lengthwise and wrapped around the frame before attaching the adapter plate with the 2 small U-bolts. The tubing will protect the frame and help hold the plate in place. Tighten the lock nuts until the plate starts to compress the tubing and it is held securely in place. Do not over tighten. Make... view full answer...
Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your Hasqvana. You should not have any problems using it on the Pack Em Rack # PK-6-OP1. view full answer...
The Pack'Em Expansion Pack # PK-OP1 has not been fitted for compatibility with your specific Husqvarna backpack blower 570 according to the manufacturer. However, the only models that have confirmed need of an adapter are the STIHL 350, 550, 600, ECHO, or RedMax models requiring # RA-STIHL. view full answer...
The Lockable Blower Rack for Utility Trailers, # RA-19, is designed to accommodate most backpack leaf blowers. At this time, only certain Stihl models are known to require an adapter (BR420, BR550, BR600). I checked with Rackem and Echo model PB-755ST does NOT require an adapter.
For installation Rackem states that for all open trailer racks you will first place the rack tower on the trailer floor flush against the trailer SIDE rail. Then drill the holes in the trailer SIDE rail using... view full answer...
According to Rack em, the ECHO PB-500T does not require an adapter but they do not list the PB-500H so an adapter would be needed. The adapter that fits Stihl and Echo models is # RA-STIHL. view full answer...
Yes! According to my technical contact at Rackem, your Stihls Backpack Blower BR200 will fit Rackem # RA-19. You will not need any additional adapters or brackets. view full answer...
The Pack'Em Blower Rack # PK-6-OP1 that you referenced will accept your Stihl BR340 Backpack Blower when used with the adapter kit # RA-STIHL. This carrier is not a fit for your Husky BT350. view full answer...
I reached out to a representative of Rack 'Em who told me that a Stihl BR350 blower does NOT need an adapter to fit on the Lockable Blower Rack for Utility Trailers # RA-19. view full answer...
You'll need an adapter, but yes, your Echo PB-9010 will work with the Rack'Em Lockable Blower Rack for Utility Trailers # RA-19.
All you'll need to do is add the Rack'Em Backpack Blower Adapter # RA-STIHL. view full answer...
The Pack'Em Rack # PK-BM-OP1 has not been fitted for compatibility with your specific Husqvarna backpack blower 350BF according to the manufacturer. However, the only models that have confirmed need of an adapter are the STIHL 350, 550, 600, ECHO, or RedMax models requiring # RA-STIHL so it will work great for you as-is.
Also the Pack'Em Rack # PK-BM-OP1 can be installed onto a trailer with round tubes instead of angle iron. It'll likely take a little creativity. We have a review from... view full answer...
For an ECHO blower, you would have to use an adapter to mount the blower on the Packem rack # PK-6-OP1. The adapter that you need is # RA-STIHL.
Another Expert found that to attach the blower frame, the tubing must be slit lengthwise and wrapped around the frame before attaching the adapter plate with the 2 small U-bolts. The tubing will protect the frame and help hold the plate in place. Tighten the lock nuts until the plate starts to compress the tubing and it is held securely in place.... view full answer...
Adapters are required for STIHL 420, 550, and 600, ECHO or RedMax backpack blowers but not for other models such as your BR200
You shouldn't have any issues using it on the Pack'Em Rack for Open Utility Trailers, Part # PK-6-OP1. view full answer...
I went out into our warehouse and pulled a Rack'em Backpack Blower Adapter # RA-STIHL and a Pack'Em Expansion Pack part # PK-OP1 and found that the adapter plate of the # RA-STIHL basically attaches with the included U-bolts to the handle of your BR600 Stihl Blower and then on the top of the plate their is a large hole that will slip over the hook portion of the # PK-OP1.
I understand that describing how it works can be a little confusing, so I shot a video for you that will show you... view full answer...
If your Shindaiwa blower is the EB-802 or EB-854 then the Rackem Lockable Blower Rack # RA-19 that you referenced will fit. If your Shindaiwa is either the EB802RT or EB854RT then Rackem adapter # RA-STIHL is required. The difference between the two models is the model with the RT ending has the throttle on the right hand side.
My research shows that the 350 blower from Stihl is hand held and at this time there is not a rack specifically available for hand held blowers. view full answer...
Yes, I looked up pictures of your Redmax 8500 blower and the handle on the top of it would easily hook to the top hook of the Rack'em Back Pack Blower Rack # RA-4. view full answer...
The Rack 'Em Blower Rack for Utility Trailers # RA-19 will work with your Husky 580BT blower. No adapters should be needed. My contact at Rack 'Em said your 580BT handle design should work great on this rack. view full answer...
Your Stihl BR380 blower should be fine but the BR420 will need an adapter to fit, # RA-STIHL420. The Rack'em Lockable Blower Rack # RA-19 can be installed on a trailer with tube or boxed frames since it just bolts onto the trailer. Depending on the thickness of the tube stock you may find that you will need longer hardware which you can get from any hardware store. view full answer...
I spoke to my contact at Pack'Em and they informed me that you will not need an adapter to use your RedMax Blower EBZ8500 on the Pack'Em Rack for Open Utility Trailers part # PK-6-OP1. I have attached an install video of the above rack for you as well. It is designed to hold 1 leaf blower, 1 beverage cooler, 1 line spool, and 3 lawn trimmers. The leaf blower and lawn trimmers can be locked to the rack using the included padlocks. view full answer...